As seen in Reef Hobbyist Magazine! Coral fragging has just gotten easier with the ReefKeeper™ saw. It is made to meet the specific needs of Reef Aquarists. DFS-100 ReefKeeper Saw.
As seen in Reef Hobbyist Magazine! Coral fragging has just gotten easier with the ReefKeeper™ saw. It is made to meet the specific needs of Reef Aquarists:
-
Reduced Heat Transfer Yields More Viable Frags
Heat is the enemy when cutting corals; it destroys tissue and seriously affects viability, especially with sensitive species like chalice corals. The DFS-100 ReefKeeper Saw employs a continuously cooled narrow diamond blade to dramatically reduce heat transfer to the delicate tissue when cutting. Less heat means more viable frags can become healthy colonies to swap or sell.
-
Clearance to Handle Larger Specimens
Saw through materials as tall as 3 1/2" - something you can't do with cut-ff wheels, tile saws, or any other band saw. So go ahead, tackle that Tubastrea or Favites or any large specimen with confidence.
-
Narrow Cutting Path
Rotary tools and tile saws plow a wide swath through your valuable stock. The narrow diamond blade of the DFS-100 ReefKeeper Saw is removing the least possible amount of material as it cuts, resulting in less waste—up to three times less!
Features
-
-
Use on stony corals, soft corals, and live rock.
-
The stainless steel diamond coated blade won't contaminate your tank with copper.
-
Inexpensive, replaceable BladeSert™ blade guides make the most intricate cuts simple.
-
Sturdy Thermoplastic work table won't corrode.
-
Drain channels funnel coolant into the internal drain system for a clean, clear view while sawing.
-
The upper blade guide is adjustable for varying material thickness.
-
The spring-loaded tension system, molded into the frame, insures proper wheel alignment, simple blade setup, perfect tracking hour after hour, and enhances blade life.
-
The motor is permanent magnet, high torque, with built in speed control.
-
The frame, cover, and water reservoir are molded entirely from structural grade thermoplastic making it corrosion resistant, extremely lightweight, portable, and easy to handle.
-
All frame and interior support walls are extra thick for maximum strength and durability. It's rigid and quiet
- DFS-100 ReefKeeper Saw no. 91060 includes:
(1) Stainless steel diamond coated blade
(1) Non-corrosive plastic work surface
(3) BladeSert™ blade guides
(1) User guide
- Construction: Injection molded, structural grade thermoplastic
- Motor: Permanent magnet, speed controlled, up to 2800 RPM
- Torque: 48 oz.-in
- Work surface: 8½" x 10
- Size: 18" high x 10" deep x 13" wide
- Weight: 9 pounds
- Throat Depth: 4.75" (12 cm
- Cutting Depth: Up to 3.5" (8.9cm) thick
- Minimum Radius: 3/16" (.5 cm
- Maximum Radius: 4.75" (12 cm
- 90 Day Full Confidence Warranty
Drop Ship Item
Manufacturer: Inland Hobby
MPN: DFS-100
SKU: IHRKS
